Gasboy 9820A Series - Manual (Page 34)

GASBOY Series 9820A
5-2 03/07/03
ELECTRONIC COMPONENT ACCESS
Before attempting to start-up the 9820A, it is important to become familiar with the location of
some key components as well as the various switch-selectable operating modes.
1. Unlock and remove the front panel.
Remove the two screws located at the
top of the door assembly. Pull out on
the top of the door and lift the door
assembly to remove it.
2. Loosen the two screws located on the left
and right door support brackets and pivot
display panel down.