Gasboy XU2A - Manual (Page 2)

Introduction
Page 2 MDE-4320 Gasboy UHF Pump, Blackmer® XU2A Rebuild Kit Installation Manual • June 2004
Required Tools
• 5mm Allen ® wrench
• 1/4-inch allen wrench
• heavy snap ring pliers
• ratchet wrench
• 16mm socket
• 13mm or 1/2-inch socket
• rubber mallet
• torque wrench
Acronym Table
The following table contains a list of acronyms used in this manual.
Acronym Definition
ASC Authorized Service Contractors
cmhg centimeter of mercury
CW Clockwise
CCW Counterclockwise
GDP Global Dispenser Pump
gpm gallons per minute
inhg inch of mercury
lbs pound-force
lbs-in pound-inch
lpm liters per minute
mm millimeter
N/A not applicable
Nm newton-meter
OIML International Organization of Legal metrology*
Opt. Optional
PCV Pressure Control Valve
psi pounds per square inch
Std Standard
UHF Ultra High Flow
*OIML Switch (optional) monitors air to fuel mix and is used primarily in
Europe.