Assembly part replacement, Gasboy old part replacement list – Gasboy Kit M04477K001 User Manual
Page 10
Installing the Gear Train Upgrade Kit
Page 10
MDE-4291 Gasboy Gear Train Upgrade Kit M04477K001 • March 2004
Assembly Part Replacement
The following process explains how to replace the indicated parts in the table below.
Gasboy Old Part Replacement List
Note: *The Driv-Loc Pins are suppled to replace damaged or worn Driv-Loc Pins in the Gear
Train Assembly.
1
Exchange the four top standoffs (056012) on the gear train with the four shorter standoffs
(057002) and discard the longer standoffs.
2
Install the meter interface link (M04428A001) in the top of each meter in a manner that the
guide pins (see
and
) are in the “longer slots” in the output shaft cups.
Figure 8: Meter Interface Link Guide Pins
Old Part No
New Part No
Description
054039
M04433B001
SHAFT, DISPLAY DRIVE
N/A
M04428A001
LINK, METER INTERFACE
056012
057002
STANDOFF
042615
N/A
*DRIV-LOC PIN 1/8 X 3/4
Guide Pin in Long Slot