Gasboy 9800K - Manual (Page 7)

MDE-4650 CPU Heater Kit Installation Instructions for 9800K Series Pumps · April 2007 Page 7
Installation of the CPU Heater Kit
Figure 3: Heater Cable Connection
13 Connect the new heater cable to the heater connector on the power bracket (see Figure 3 ).
Note: If the unit has an existing battery heater cable, unplug it from the connector on the
bracket and plug it into the mating connector on the new heater cable.
14 Reinstall the CPU board and connect all cables that were removed in step 6 .
15 Reinstall the pulse output or RS-485 board, if needed.
16 Reassemble the dispenser after the assembly and testing is complete.
The installation of the CPU Heater Kit for 9800K Series pumps is complete.