Gasboy Islander Card Reader Retrofit - Manual

C36080 Rev. 2078 Page 1
CFN ISLANDER & SERIES 1000 CARD READER RETROFIT INSTRUCTIONS
This sheet details the installation of a new card reader into an existing Islander or Series 1000 system. The photos
shown below represent before and after views of an Islander system. Note that the cover assembly is not used in
the new installation. The reader installation will look similar in your Series 1000 system.
IMPORTANT FOR SERIES 1000: This kit works only with Series 1000 versions 3 or later. To check your
version: At the Series 1000 data terminal, type the PR command at the asterisk prompt. The version,
program name and date displays. If your version is 1 or 2, consult your distributor before proceeding.
Before After
Old Reader with Cover Assembly New Reader (Cover Assembly Not Required)
(CFN Islander Shown) (CFN Islander Shown)
CFN ISLANDER KIT CONTENTS - C36090
This kit includes the following:
Item Part No. Description
1 C09986 Assembly, Adapter Plate, Card
Reader, Cable and Gasket
(shown right)
2 C36080 Instruction Sheet (this sheet)
3 035282 Warnings & Safeguards Sheet
4 C07529 Cable Assembly, Reader
(shown right, loose cable)
SERIES 1000 KIT CONTENTS - C36096
This kit includes the following:
Item Part No. Description
1 C09985 Assembly, Adapter Plate, Card Reader, Cable and
Gasket (shown right)
2 C36080 Instruction Sheet (this sheet)
3 035282 Warnings & Safeguards Sheet