GBS Elektronik MCA166-USB - Manual (Page 42)

MCA166-USB
Name MMCA_SET_MCS_INPUT_ICR
Description The command selects the count rate signal as MCS input.
Parameter -
Results -
Return Code see MMCA_RESET command
Name MMCA_SET_MCS_INPUT_TTL
Description The command selects the external TTL signals as MCS input.
Parameter -
Results -
Return Code see MMCA_RESET command
Name MMCA_SET_MCS_INPUT_DISCR
Description The command selects the software discrimination of ADC-input pulses as MCS
input.
1. Parameter Channels integer value 128, 256, 512, 1024, 2048 or 4096
2. Parameter LLD integer value 0 <= LLD < ULD
3. Parameter ULD integer value LLD < ULD< (Channels-(Channels>>5))
Results -
Return Code see MMCA_RESET command
42