Geist R-Series PDU v4 - Manual (Page 21)

Web Interface 21
© 2014 Geist
Sensors System Help
Overview Users Time Info
Alarms & Warnings Network Admin Support Site
Cameras Email Locale
Logging SNMP Restore Defaults
LDAP Firmware Update
Syslog
3. Log In / Log Out
Click to log in or log out of the unit. Note that both user-name and password
are case sensitive; prohibited characters are: $&`:<>[ ] { }"+%@/ ; =?\^|~',
4. Alarms and Warnings
Indicates the number of Alarms and Warnings currently occurring, if any.
5. Device Label
Displays the user-assigned label of this unit (see "Configuration and Operation")
6. Device ID
Unique product identification. May be required for technical support.
7. Total and Individual Phase or Line Monitor
Displays AC current, voltage, and power statistics for each individual phase,
and for the total of all phases combined.
8. Current Monitor
Displays AC current draw statistics for each individual circuit on the PDU.
Note: Groupings for Total, Line, Phase and Current Monitor will vary depending on
the PDU's configuration and wiring.
Configuration Icon Operation Icon
4.1.1.1 Configuration and Operation
Note: Only users with control-level authorizations have access to these settings.
Device, Phase and Circuit Configuration:
1. Click the desired Configuration icon to change the device's Label. (Name is the
PDU's factory name or model, and cannot be changed.)
2. Once done, click Save.