Geist R-Series PDU v4 - Manual (Page 40)

R-Series PDU v4 Instruction Manual 40
© 2014 Geist
A test trap may be sent by clicking on the Test icon next to the trap destination.
4.2.5 LDAP
The Lightweight Directory Access Protocol (LDAP) can be setup through this menu.
Enable: Enabling or Disabling LDAP
LDAP URI: LDAP Uniform Resource Identifier shall be formatted as: ldap://
HOST:PORT. The "HOST" can be an IPv4 address, an IPv6 address in brackets (ie.
[2001:0DB8:AC10:FE01::]), or a host name. The default port for LDAP is 389.
Bind DN: Distinguished Name (DN) used to bind to the directory server.
Bind Password: Password used to bind to the directory server.
Base DN: DN to use for the search base.
The remaining fields come from the NIS schema, defined in RFC2307. They are
used to authenticate users in LDAP. Leaving them blank will use the default value,
which is shown in the picture, in orange.
User Filter: LDAP filter for selecting users.
"uid" Mapping: Name of the server attribute that corresponds to the "uid" attribute
in the schema.
"uidNumber" Mapping: Name of the server attribute that corresponds to the
"uidNumber" attribute in the schema.
Group Filter: LDAP filter for selecting groups
"gid" Mapping: Name of the server attribute that corresponds to the "gid" attribute
in the schema.
"memberUid" Mapping: Name of the server attribute that corresponds to the
"memberUid" attribute in the schema.