innovaphone IP240 - Manual (Page 10)

Operating Manual IP Telephone IP240 - 8 -
- 8 -
During an active call, press the redial key to initiate a second call. The call is
automatically transferred as soon as the phone rings or there is a call-waiting
indication at the selected destination. You have the possibility to set up a
conference.
Tip:
When transferring a call, you do not have to wait until the
subscriber answers. After dialling the phone number, you can
hang up immediately (without consultation).
2.2. Three-party conference
You can set up a conference between yourself and two other connections. Set up two
connections (see chapter 2.1). Once two connections have been set up, a conference
can be initiated.
¾ Press the menu key.
¾ By pressing the menu key again, you can end the conference. The call put on hold
before initiating the conference is now on hold again.
¾ To terminate the active connection, you must press the Clearing key . The
connection to the active call partner is terminated. The call on hold now becomes
the active call.
2.3. Hold and retrieve
You can switch between two connections using the hold and retrieve function.
1. Set up an active connection and a connection on hold (see chapter 2.1).
2. Press the Consultation key during a call with an active connection and a
connection on hold. The active connection is put on hold and the connection on
hold is activated.
3. To terminate the active connection, you must press the Clearing key. The
connection to the active call partner is terminated. The call on hold automatically
becomes the active call.
Note:
If you replace the handset during the conference, the two call partners
remain connected together.
Note:
The hold and retrieve function described in this chapter relates only to two
connections. See chapter 2.9 for details on how to manage several
connections.