Ivoclar Vivadent Lumamat 100 - Manual (Page 10)

10
3. Product Description
3.1 Components
The Lumamat 100 consists of the
following components:
– Base housing with electronic
controls
– Swivel arm with curing
chamber (lamps and heater)
3.2 Hazardous areas and safety
equipment
Description of the hazardous areas:
Risk of burning Outer surfaces of the curing chamber
Risk of eye damage Lamp
Risk of electrical shock Electrical components
Risk of crushing Opening / closing mechanism
Risk of burning Heater
Type of risk Hazardous area
Description of the safety equipment:
The program is stopped when the apparatus is
opened Safety switch
Prevents eye damage Tinted viewing window
Protection from electrical shock Protective conductor
Protective effect Safety equipment
Also refer to Chapter 2.
3.3 Functional description
The lamp radiates light at 400-580 nm, which
initiates curing of the material. The integrated
heater may be set on three different stages and is
used for tempering the material. Please observe the
recommended values in the Instructions for Use of
the material. The apparatus is thus especially
suitable for tempering the SR Adoro material.
3.4 Contraindication
– Curing of restorations mounted in an articulator.
– Curing of restorations on plaster models heavier
than 400 g
– Curing of restorations on plaster model
exceeding a height of 70 mm
– Curing of restorations on plaster models with a
diameter of more than 80 mm
– Curing of restorations on resin models and
thermoplastic materials
– Curing of temperature sensitive materials