Samsung SM-G930F - Manual (Page 178)

Appendix
178
Hearing
Sound detectors
Set the device to vibrate when it detects your doorbell or a baby crying.
While you are using voice recognition, such as S Voice, the sound detectors will not
operate.
Baby crying detector
On the Apps screen, tap Settings → Accessibility → Hearing → Sound detectors, and then
tap the Baby crying detector switch to activate it. The device will vibrate when it detects
sound and the alert will be saved as a log.
Doorbell detector
1
On the Apps screen, tap Settings → Accessibility → Hearing → Sound detectors, and
then tap the Doorbell detector switch to activate it.
2
Tap to make a recording of your doorbell.
The device will detect and record the doorbell.
3
Tap and ring your doorbell to check if it is recorded correctly. When the device detects
the doorbell sound, tap OK.
To change the doorbell sound, tap Change doorbell sound.
The device will vibrate when it detects sound and the alert will be saved as a log.
Setting flash notification
Set the flash to blink when an alarm sounds or when you have notifications, such as incoming
calls and new messages.
On the Apps screen, tap
Settings → Accessibility → Hearing, and then tap the Flash
notification switch to activate it.