Marantz SR9600N - Manual (Page 10)

6
ENGLISH
e HEADPHONE jack for stereo headphones
This jack may be used to listen to the SR9600’s
output through a pair of headphones. Be certain
that the headphones have a standard 1/4” stereo
phono plug. Note that the main room speakers will
automatically be turned off when the headphone
jack is in use.
Notes:
• When using headphones, the surround mode can
be change to STEREO or Dolby Headphone using
MENU and Cursor button.
• The surround mode returns to the previous setting
as soon as the headphone plug is removed from
the jack.
r SURROUND MODE button
You can select the surround mode by pressing this
button. (See page 49)
t AUTO (Auto Surround) button
Press this button to select the AUTO Surround mode.
When this mode is selected, the receiver determines
the surround mode corresponding to a digital input
signal automatically. (See page 49)
q POWER switch and STANDBY indicator
You can turn on and off the unit’s power using the
front panel power switch.
However, if you turn the unit off with the front panel
switch, the unit goes completely off rather than to
the “standby mode” (Red LED indicator light glows
in the standby mode).
The unit cannot be turned on with the remote
control when it is not in the standby mode. When
the red LED is on, the unit can be turned on via the
remote control or by pressing any input selector
button on the front panel.
w INPUT SELECTOR knob (AUDIO/VIDEO)
This knob is used to select the input source.
Video selectors, such as DVD, LD, TV, DSS, VCR1,
VCR2 and AUX1 select video and audio simultaneously.
Audio function sources, such as TAPE, CD-R, CD,
TUNER-1, TUNER-2 and AUX2 may be selected
in conjunction with the video source.
This feature (Sound Injection) combines sound
from one source with a picture from another.
Choose the video source first, then choose a
different audio source to activate this function.
y MULTI (Multiroom) button
Press this button to activate the Multiroom system.
“
ROOM A/ROOM B ” indicator will be illuminated in
the display. (See page 62)
u MULTI SPEAKER button
Press this button to activate the Multiroom
Speaker system. “
M-SP A/M-SP B ” indicator will
be illuminated in the display. (See page 62)
i GYRO TUNING dial
Rotate this dial to change the frequency or the preset
number of the tuner.
o AUTO TUNE button
When this button is pressed and the GYRO TUNING
dial is rotated, auto scan function of the tuner
frequency starts.
!0 T-MODE (Tuner Mode) button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
The “
AUTO ” indicator lights in the auto stereo
mode. (See page 58)
!1 BAND button
Press this button to switch between FM and AM in
the tuner mode.
!2 F/P (Frequency/Preset) button
During reception of AM or FM, you can change the
function of the GYRO TUNING dial for scanning
frequencies or selecting preset stations by pressing
this button.
!3 CLEAR button
Press this button to cancel the station-memory
setting mode or preset scan tuning.
(See page 59)
!4 MEMORY button
Press this button to enter the tuner preset memory
numbers or station names. (See page 59)
!5 VOLUME control knob
Adjusts the overall sound level. Turning the control
clockwise increases the sound level.
!6 AUX1 INPUT jacks
These auxiliary audio/video input jacks accept the
connections of a camcorder, portable DVD, video
game system, etc. When not using these jacks,
protect with the included jack covers.
How to Attach the Front AUX Jack Cover
AUX 1 INPUT
AUDIO
S-V IDEO
DIGITAL
VIDEO
L
R
UP
PUSH PUSH
!7 PURE DIRECT button and indicator
When this button is pressed once, “ SOURCE
DIRECT ” appears on the FL display. If pressed again,
“ PURE DIRECT ” appears. After 2 seconds, the FL
display indication goes out.
In the source/pure direct mode, the tone control
circuitry and bass management are bypassed.
Notes:
• The surround mode is automatically switched to
AUTO when the pure direct function is turned on.
• Additionally, speaker configurations are fixed
automatically as follows.
Front SPKR = LARGE
Center SPKR = LARGE
Surround SPKR = LARGE
Surround Back SPKR = LARGE
Sub woofer = YES
!8 THX button and indicator
Press this button to activate THX processing for
the input source. The “
THX ” indicator is illuminated
in the THX mode.
!9 7.1CH INPUT button
Press this button to select the output of an external
multichannel player.
@0 MENU button
Press this button to enter the OSD menu system.
@1 Cursor ( , , , )/ENTER button
Press these buttons when operating the OSD menu
system and tuner function.
FRONT PANEL
Front AUX Jack Cover
MULTI MULTI SPEAKER SPEAKER
F/P F/P BAND BAND THX THX PURE DIRECT PURE DIRECT UP UP DOWN DOWN TUNING TUNING
AUX 1 INPUT AUX 1 INPUT R R AUDIO AUDIO DIGITAL DIGITAL S-VIDEO S-VIDEO L L VIDEO VIDEO POWER ON/OFF POWER ON/OFF
VOLUME VOLUME
UP UP DOWN DOWN
INPUT SELECTOR INPUT SELECTOR
PHONES PHONES
STANDBY STANDBY
AV SURROUND RECEIVER SR9600 AV SURROUND RECEIVER SR9600
SURROUND SURROUND
MIC MIC
ENTER ENTER MENU MENU
PURE DIRECT PURE DIRECT THX THX
7.1CH INPUT 7.1CH INPUT
MODE MODE AUTO AUTO MULTI MULTI
A/B A/B
T-MODE T-MODE MEMORY MEMORY CLEAR CLEAR
DISPLAY DISPLAY
EXIT EXIT
SPEAKERS SPEAKERS MRAC MRAC
AUTO TUNE AUTO TUNE
@0 @2 @4 @1
q t y u o i
@7 @6
!0
!3
!4 !5 !6 e w
!7 !8!9 @3 @5
!2 !1 r
SR9600N DFU_01_ENG 1_4 05.5.23, 5:39 PM Page 6 Adobe PageMaker 6.5J/PPC