Marantz SR9600N - Manual (Page 11)

7
ENGLISH
FL DISPLAY AND INDICATOR Note:
• This indicator flashes if the input signal cannot be
detected.
¡3 DIGITAL/ANALOG input indicator
DIGITAL
This indicator is illuminated when a digital input
has been selected.
ANALOG
This indicator is illuminated when an analog input
source has been selected.
¡4 SIGNAL FORMAT and TUNER indicators
2 DIGITAL
This indicator is illuminated when a Dolby Digital
signal is input.
EX
This indicator is illuminated when a Dolby Digital
EX signal is input.
dts
This indicator is illuminated when a DTS signal is
input.
ES
This indicator is illuminated when a DTS ES signal
is input.
96/24
This indicator is illuminated when a DTS 96/24
signal is input.
PCM
This indicator is illuminated when the input signal
is PCM (pulse code modulation).
HDCD
This indicator is illuminated when the input signal
is from a HDCD.
Sampling frequency
This indicator displays the sampling frequency
when a PCM or multi channel PCM signal is input.
32, 44.1 and 48 kHz are not displayed.
SA-CD
This indicator is illuminated when the input signal
is from a SACD.
M-PCM
This indicator is illuminated when the input signal
is multi channel PCM.
AUTO
This indicator is illuminated when the tuner’s auto
mode is in use.
TUNED
This indicator is illuminated when a station is being
received with sufficient signal strength to provide
acceptable listening quality.
ST (Stereo)
This indicator is illuminated when an FM station is
being received in stereo.
@2 EXIT button
Press this button to exit from the OSD menu system.
@3 DISPLAY button
When this button is pressed, the FL display mode
is changed as follows :
Normal display → → → → → Level meter→ → → → → Auto display
off → → → → → Display off → → → → → Normal display.
The display off indicator “ DISP ” is illuminated when
Display off is selected.
@4 MRAC button/MIC jack
Press this button to automatically measure speaker
characteristics using the included microphone
(MC-10). (See page 36)
@5 SPEAKER A/B button
Press this button to select speaker system A and/or B.
@6 INFRARED receiver window
This window receives infrared signals for the
remote control unit.
@7 INFRARED transmitter window
This window transmits infrared signals for the
remote control unit.
Opening and closing the front panel door
When you want to use the controls behind the front
panel door, open the door by gently pressing on
the lower part of the panel. Keep the door closed
when not using these controls.
Caution:
• Be careful not to pinch your fingers between the
door and the panel.
DIGITAL
ANALOG
i.LINK
HDMI
L
SL
dB
DVD:AT-HDMI 2
DOLBY DIGITAL EX
C R
SR S
LFE
+18.0
ATT PEAK SPKR A.B MULTI A.B.SPK
SLEEP V-OFF Re-EQ NIGHT DIGITAL
SURROUND
AUTO ST TUNED
TUNED ST
DISP
g
s
j ¡0 ¡1 ¡3 ¡2 f ¡4 h l k
d
¡6
¡5
a
¡4
¡7 ¡8
¡3
When the display is OFF
Normal display
a DISP (Display Off) indicator
This indicator is illuminated when the SR9600
display is turned off.
s SURROUND mode / i.LINK indicator
This indicator is illuminated to show that the
surround mode is in use.
It also displays i.LINK information.(See page 28)
d Main Information Display
This display shows messages relating to the
status, input source, tuner, audio input mode or
other aspects of unit’s operation.
f SLEEP timer indicator
This indicator is illuminated when the sleep timer
function in the main room is in use.
g Multiroom system indicator
This indicator is illuminated when the multiroom
system is active.
h V (Video)-OFF mode indicator
This indicator is illuminated when the Video off
mode is selected.
j SPKR (Speaker) A/B indicator
This indicator displays which speaker system is
active.
k Re-EQ indicator
This indicator is illuminated in the Re-EQ mode.
l NIGHT mode indicator
This indicator is illuminated when the SR9600 is in
the Night mode, which reduces the dynamic range
of digital program material at low volume levels.
¡0 PEAK indicator
This indicator is a monitor for an analog audio input
signal. If the selected analog audio input signal is
greater than what the internal processor can hold,
this is illuminated If this happens, you should press
the
ATT button on the remote control unit.
(See page 12)
¡1 ATT (Attenuation) indicator
This indicator is illuminated when the attenuation
function is active.
¡2 HDMI/i.LINK indicator
HDMI
This indicator is illuminated when the audio signal
input from the HDMI jacks is being played back.
i.LINK
This indicator is illuminated when the audio signal
input from the i.LINK connector is being played
back.
When operating
the SR9600 as a tuner
SR9600N DFU_01_ENG 1_4 05.5.23, 5:40 PM Page 7 Adobe PageMaker 6.5J/PPC