Surr. right surr. left, Pb cr, Pr y cb – Marantz SR9600N User Manual
Page 28: Pr y, Lr c, Unswitched 100w max
24
ENGLISH
HDMI JACK
This unit has two HDMI inputs and one HDMI output.
It can send digital video and audio signals from DVDs
and other sources directly to a display. It minimizes
signal degradation caused by analog conversion so
that high quality images can be enjoyed.
Select an input source from the OSD menu system.
(See page 44)
Notes:
• When the HDMI output is connected to a display
monitor that does not support HDCP, signals are
not output. To view images in HDMI, it is
necessary to connect to a display that supports
HDCP.
• There may be no image output if connected to a
TV or display that is not compatible with the
above format.
• Refer to the instruction manual of the TV or
display to be connected to the SR9600 for detailed
information regarding the HDMI terminal.
* HDCP: High-bandwidth Digital Content Protection
CONNECTING HDMI DEVICES
An HDMI cable (sold separately) is used to connect
the HDMI jack on the SR9600 with the HDMI jack on
a DVD player, TV, projector or other component. To
transmit multichannel audio via HDMI, the connected
player must support multichannel audio transmission
through its HDMI jack.
HDMI video streaming is compatible with DVI in
principle. Therefore, it is possible to connect to a TV
or monitor that has a DVI terminal using an HDMI-DVI
conversion cable or plug. When connecting to a DVI
terminal, connect the audio signal separately.
Notes:
• Some HDMI components can be controlled over
the HDMI cable, but this receiver cannot control
other components this way.
• When connected to a monitor (i.e., TV, projector,
etc.) that does not support HDCP, video and audio
are not output.
• DVI cables come with 24-pin and 29-pin plugs.
This receiver supports 24-pin DVI-D cables; 29-
pin DVI cables cannot connect to it.
•
Some source devices such as DVD players do not
support HDMI repeater operations like those of
the SR9600. In such case, pictures are not
properly projected on monitors such as TVs and
projectors.
• When multiple components are connected to this
receiver, turn power to unused components off to
prevent interference between them.
DVD PLAYER
VIDEO PROJECTOR
• Disconnecting or connecting cables with the
power on can damage the equipment. Turn the
power off before disconnecting or connecting
cables.
• Some DVD-Audio disks disable downmixing.
These types of disks are not played back correctly
unless the left, center, right and surround left and
right speakers, and subwoofer are connected.
• If a DVD player that does not support HDMI 1.1
is connected to the SR9600, multi channel PCM
playback is not possible even with DVD-Audio
disks.
• If a DVD player or other device with DVI output
is connected to the SR9600, a separate audio cable
(i.Link, optical-digital, coaxial digital or analog)
is needed for the audio signals. In this case, select
the connected audio input as explained in “1-1
FUNC INPUT SETUP”. (See page 33)
• Multi channel PCM signals and audio signals of
62 kHz or higher that are input from the HDMI
jack are not output from the DIGITAL OUT jacks.
• Depending on the quiality of the cable used, the
HDMI signal may be affected by noise.
USB AUDIO
OUTPUT
INPUT-1
(DVD)
INPUT-2 (DSS)
INPUT-1 (DVD)
INPUT-3 (VCR-1)
2
CD
INPUT-2
(DSS)
2
1
1
2
3
4
4
3
RS232C
DC OUT
EMITTER OUT
MULTI RC
RC-5
MONITOR OUT
1
OUT
IN
OUT
IN
DSS
TV
DVD
LD
TAPE
VCR-1
OUTPUT-2
OUTPUT-1
IN
MAIN IN
7.1CH IN
MULTI OUT
SURR.
RIGHT
SURR.
LEFT
SPEAKER SYSTEMS
FRONT A OR B, CENTER, SURR,
SURR BACK : MINIMUM 6 OHMS
FRONT A + B : MINIMUM 8 OHMS
CENTER
FRONT B
RIGHT
FRONT B
LEFT
FRONT A
RIGHT
FRONT A
LEFT
SL
SBL
SL
SR
SBL
SBR
SW
A
B
SBR
SR
COAX
OPT
8
7
6
2
5
4
3
1
DIGITAL
IN
DIGITAL
OUT
OUT
AC IN
CB
/
PB
CR
/
PR
Y
CB
/
PB
CR
/
PR
Y
CB
/
PB
CR
/
PR
Y
CB
/
PB
CR
/
PR
Y
CB
/
PB
CR
/
PR
Y
R
L
MODEL NO. SR9600
TUNER-1
FM(75
Ω
)
GND
AM
FM(75
Ω
)
GND
AM
TUNER-2
(AUDIO)
S400
S400
INPUT-4 (VCR-2 / DVD-R)
VCR-2 / DVD-R
IN CD-R / MD OUT
R
L
(AUX 2)
C
AUDIO
PRE OUT
L
R
C
AUDIO
SW
VIDEO
S-VIDEO
R
L
MULTI OUT
VIDEO
A
B
COMPONENT
VIDEO
HDMI
Ver 1.1
FLASHER RECEIVER
IN
IN
IR
OUT
IN
SURR.BACK
/MULTI SPK.
/SPK. C
RIGHT
SURR.BACK
/MULTI SPK.
/SPK. C
LEFT
ON
OFF
SPEAKER C
UNSWITCHED 100W MAX
AC OUTLET
230V 50/60H
Z
OUTPUT
INPUT-1
(DVD)
INPUT-2
(DSS)
HDMI OUTPUT
HDMI INPUT
HDMI OUTPUT
SATELLITE TUNER
SR9600N DFU_01_ENG 3_4
05.5.23, 5:47 PM
Page 24
Adobe PageMaker 6.5J/PPC