NavCom RT-3010 Rev.F - Manual (Page 34)

RT-3010 User Guide – Rev. F
„ Link
LEDs
‡
The Link LEDs are software
configurable via the x3f proprietary
command. The factory default
configuration is Rover Mode. The Link
LEDs are not used in Base Mode.
Table 6: Link LED Indication (Default Rover Mode)
LINK Status
Command Mode
Repeating Red to Amber to Green indicates
Searching for base radio signal
C/No - Strong Signal Strength from base
radio
C/No - Medium Signal from base radio
C/No - Weak Signal Strength from base
radio
„ Base
LEDs
Table 7: Base Station Indication
BASE Status
The following BASE LEDs reflect the type of RTK
corrections when the RT-3010 is operated as a
Base Station
RTK/UltraRTK™ - NCT Proprietary
CMR
RTCM, 20,21; 18,19
2-32