NavCom RT-3010 Rev.F - Manual (Page 67)

RT-3010 User Guide – Rev. F
Connector Assignments
Data Interfaces:
2 serial ports from 1200 bps to 115.2 kbps
Input/Output Data Messages
NCT Proprietary
Data PVT ,
Raw Measurement
Satellite Messages
Nav Quality
Receiver Commands
NMEA-0183
Messages
(Output Only)
ALM, GGA, GLL, GSA, GST,
GSV, RMC, VTG, ZDA
Proprietary
NMEA-0183 Type
(Output Only)
SET
Code Corrections RTCM 1 or 9
WAAS/EGNOS/MSAS/GAGAN
RTK Correction
Data (I/O)
NCT Proprietary
RTCM 18,19 or 20, 21
CMR+/CMR (Msg. 0, 1, 2)
‡
See Related Standards at the front of
this manual for information on the
various data formats
LED Display Functions (Default)
Link
Base Radio Signal
(Rover Mode)
Base Station
Type of Correction/Rate
(Base Mode)
GPS
Position Quality
A-65