Chapter 2 interfacing, Electrical power, Chapter 2 – NavCom RT-3020 Rev.A User Manual

Page 14: Interfacing

Advertising
background image

RT-3020S User Guide

3-12

Chapter 2

Interfacing

This chapter details the RT-3020

GPS

sensor

connectors and status display. Appropriate sources of
electrical power, and how to interface the
communication ports.

Electrical Power

The electrical power input comprises a 4-pin

LEMO

female connector located on the bottom front panel of
the RT-3020, and is labeled ‘DC PWR’ as shown in
Figure 2. The pin designations of this connector are as
follows; see Figure 2 for pin rotation.

Pin Description

1 Return

2 Return

3

Power Input 10 to 30 VDC

4

Power Input 10 to 30 VDC

Table 1: External Power Cable Pin-Out

Pins 1 and 2 are connected together inside the RT-3020

GPS

sensor. Pins 3 and 4 are connected together inside

the

GPS

sensor.

Advertising
This manual is related to the following products: