Orion System VAV II Controller v.1 - Manual (Page 24)

Zone
Zone
VAV/CAV CONTROLLER CONFIGURATION
VAV/CAV/MUA Operator Interface SD 24
VAV/CAV Confi guration Screen Index
VAV/CAV Confi guration Screen Index
The available Confi guration Screens for the VAV/CAV Controller are
listed on the next few pages by sequential screen number. When the Unit
Controller is confi gured for the fi rst time, it is best to start with screen #1
and proceed to each screen in numerical order until you have viewed all
available Confi guration Screens. This ensures that you have seen all the
available Controller confi guration possibilities and have the opportunity
to change or accept the defaults for each screen.
Once the unit is confi gured and you decide to change one of the screen
options, it is helpful to know what screen number contains the confi gu-
ration you wish to change. With this in mind, the following is a list of
all the VAV/CAV Confi guration Screens in numerical order with a brief
listing of the confi guration feature available on each screen.
Screen #1 Constant Volume Mode Active
Screen #2 Controlling Sensor
Screen #3 Economizer Control By This AHU
Screen #4 Fan Cycle Mode Needed
Screen #5 Proof of Flow Switch Installed
Screen #6 OA Humidity Sensor Installed
Screen #7 Dehumidifi cation Installed
Screen #8 Relief Pressure Control Installed
Screen #9 Relief Pressure Control Reverse Acting
Screen #10 Supply Air Setpoint Reset Source
Screen #11 CO
2
Sensor Installed
Screen #12 CO
2
Sensor Maximum Reading
Screen #13 Air to Air Heat Pump Control
Screen #14 Broadcast Time Clock To Loop Units
Screen #15 Broadcast Outside Temperature
Screen #16 Broadcast Supply Temperature
Screen #17 Broadcast Humidity Reading
Screen #18 Broadcast Internal Schedule
Screen #19 Broadcast Status Fan & Heat
Screen #20 Broadcast VAV Boxes Force To Max
Screen #21 Broadcast VAV Boxes Force To Fixed
Screens #22-41 Relay Confi guration Relays 2-21