Orion System VAV II Controller v.1 - Manual (Page 73)

VAV/CAV/MUA Operator Interface SD
INDEX
73
H-M
HVAC Mode
Cooling Setpoints.........31
Heating Setpoints.........31
Schedule Setpoint.........49
Select Deadband Setpoint.........32
Sensor Slide Offset Setpoint.........49
HVAC Mode Sensor Slide Offset Setpoint.........36
HVAC Mode Setpoints.........31
HVAC Mode Status
, MUA II Controller.........51
HVAC Schedule Setpoint.........35
Hysteresis.........46
I
Initialization Screen.........11 , 17
Internal Schedule Optimal Start Soak Multiplier.........36
K
Keys , Described.........10 , 16
L
Last Polled Zone , MiniLink PD.........63
Level 1 User , Defi ned.........19
Level 2 User , Defi ned.........19
Local Analog Value Controlling Sensor.........25
Loop
Search.........20
Lo SAT Cutoff.........33
Low Control Temp Alarm.........41
Low Cutoff Temperature.........33
Low SAT Limit.........47
M
Main Fan Status , VAV/Zone.........54
Maverick Testing , MiniLink PD.........64
Maximum
Damper Force Mode.........62
EMS Offset VAV/Zone.........59
Slide Offset VAV/Zone.........59
Mechanical Heat/Cool Failure Time Period Setpoint.........35
Mech Cool Alarm.........41
Mech Heat Alarm.........41
MHGRV Output %
, MUA II Controller.........52
MHGRV Output % Status , VAV/CAV Controller.........41
Min Damper Force Mode.........62
MiniLink PD Confi guration.........63
Alarm Polling.........64
Last Polled Zone.........63
Maverick Testing.........64
Mode Changeover Time.........63
Optimal Start Target Zone.........64
System Type.........63
MiniLink PD Status
Adding Additional.........20
Cool Total.........64
Heat Total.........64
Minutes Left.........64
Mode Priority.........64
Schedule Mode.........64
System Status.........64
Minimum Run Times and Off Times.........37 , 48
Minus Key , Defi ned.........10 , 16
Minutes Left , MiniLink PD Status.........64
Mod Heating Override.........65
Mode
Changeover Time.........63
of Operation.........12
, 18 , 60
Priority.........64
Selection Buttons Defi ned.........10
, 16
VAV/CAV Status Screen.........39
Mode Cooling Setpoint Status , VAV/CAV Controller.........39
Mode Enable Temperature Status , VAV/CAV Controller.........39
Mode Heating Setpoint Status , VAV/CAV Controller.........39
MODGAS Output % , MUA II Controller.........52
MODGAS Output % Status , VAV/CAV Controller.........41
Modular Service Tool
Alarms Button.........13
Alarm Search.........13
Connection Diagram.........5
Defi ned.........4
Dimensions.........4
Energy Saving Timer.........12
Initialization Screen.........11
, 17
Instructions.........31
Mode Selection Buttons.........10
, 16
Override Search.........13
Overrides Tool.........13
VAV/CAV Setpoints.........31
Modular System Manager
Connection Diagram.........7
Defi ned.........6
Dimensions.........6
Network Connection.........7
Stand-Alone Connection.........9
Month.........11 , 17
Morning Warm Up.........32
MUA II Controller
Alarm Conditions.........52
Confi guration Screens.........43
Outputs Force.........65
Relay Overrides.........65
Relay Status.........52
Status Screens.........51
MUA II Controller Confi guration Screen Index.........42
MUA II Controller Status Screen Index.........50
MUA II Setpoint Index.........45
MUA II Status Screen Index.........50
Multiple MGRS.........18