Remotec ZTS-110 V3.12 - Manual (Page 17)

16
COOL Mode: thermostat controls the temperature according to the following
diagram
o o Example for Cooling: (Set point = 80 F, Swing = 1 F)
o o => Cooler turns on when room temp is 81 F and off at 79 F.
AUTO:
thermostat controls the temperature according to the following
diagram
o o There is a dead band 4 F/2 C between heat set point and cool set point.
o Example 1: If user select heat set point is 70 F, the minimum cool set point will be
o o limited at "heat set point" + 4 F: 74 F
o o
Pervious heat set point is 70 F and cool set point is 74 F
o Example 2: If user changes heat set point to 72 F, cool set point will be updated to
o 76 F automatically to maintain the dead band.
Swing
Temperature
Output
Off
Cool
Turn off
Set point
Turn on
Temperature
Output
Off
Heat
st 1 Turn off
nd 2 Turn off
Heat Set point
st 1 Turn on
nd 2 Turn on
Diff Swing Swing Dead band
Cool Set point