Remotec ZTS-110 V3.12 - Manual (Page 23)

LCD indication Step Procedure / Description
Press and hold "UP" and "DOWN" key for
2 seconds to disable / enable event during
the time setting.
If the event is disabled, "OFF" will be
displayed.
If the event is enabled, time will be displayed
and Hour will keep flashing.
5
WAKE MO TU WE TH FR
WAKE
AM
MO TU WE TH FR
22
Press "Prog" key once to confirm the setting
and it will go to target setting.
If the event is enabled, it will go to target
setting.
Target will keep flashing, press Up/Down
key to adjust Heat set point for heating.
If the event is disabled, it will go to next
event setting.
6
WAKE
TARGET
AM
MO TU WE TH FR
HEAT
Press "Prog" key once to confirm the
setting and it will go to target setting.
Target will keep flashing, press Up/Down
key to adjust Cool set point for cooling.
7
WAKE
TARGET
AM
MO TU WE TH FR
COOL
Press "Prog" key once to confirm the setting
and it will go to next event mode.
Follow the program UI to complete the
whole scheduling or press Home key once
to save and exit.
8