Remotec ZTS-110 V3.12 - Manual (Page 31)

30
Delete (Exclude) ZTS-110 from Gateway / Controller Z-Wave
network
Support Association Groups (Association Command Class)
ZTS-110 supports 3 association groups.
LCD indication Step Procedure / Description
Gateway / Controller device should be set to
Exclusion mode.
Press and hold "Home" key for 2 seconds
to set ZTS-110 to Add (Inclusion) / Delete
(Exclusion) Mode.
1
Press "Prog" key once, it will search the
network.
2
If the ZTS-110 is removed from the network,
it shows no connection. Exclusion is
completed.
3
Press "Home" key once to go back to the
home page.
will appear on the main display.
4
WAKE
AM
PROG ON
MO
FAN AUTO
OFF
Association group
Association group_1
(Heat pump)
Association group_2
(Compressor) Mode
Heating mode
ON
(basic set command 0xFF)
OFF
(basic set command 0x00)
Cooling mode
OFF
OFF
(basic set command 0x00)
OFF
(basic set command 0x00)
ON
(basic set command 0xFF)
OFF
(basic set command 0x00)