Remotec ZTS-110 V3.12 User Manual
Page 34
0 (0x00) = Disable
1 (0x01) = Enable,
default
8 (0x08)
Easy mode
0 (0x00) = 24 hours
1 (0x01) = 12 hours (am / pm),
default
9 (0x09)
Value(X): 0 (0x00), 3 (0x03) to 255 (0xFF)
0 (0X00) = Disable,
default
3 (0x03) to 255 (0xFF) minutes
(Thermostat sends "Basic Set" command to its
association node repeatedly in every X minutes)
10 (0x0A)
Time format
Repeat basic set
counter
(Association Group
A and B only)
Parameter value range
Parameter No.
Functions
0 (0x00) = disable AUTO report if room
temperature is different from last report.
AUTO report if room temperature is different from
last report.
Delta change is >=
o o
1 (0x01) = 1 F (0.5 C)
o o
2 (0x02) = 2 F (1.0 C)
o o
3 (0x03) = 3 F (1.5 C)
o o
4 (0x04) = 4 F (2.0 C),
(default)
o o
5 (0x05) = 5 F (2.5 C)
o o
6 (0x06) = 6 F (3.0 C)
o o
7 (0x07) = 7 F (3.5 C)
o o
8 (0x08) = 8 F (4.0 C)
11 (0x0B)
Trigger AUTO report
if room temperature
is different from last
report.
(It will report room
temperature only)
*User can use this
function to enhance
batteries service life.
33
Unit in
:
Range from 5
to [(37
) - (dead band)]
Range from 50 (0x0032) to 355 (0x0163)
Example 28
; input = 280 (0x0118)
Unit in
:
Range from 41
to [(99
) - (dead band)]
Range from 410 (0x019A) to 960 (0x03C0)
Example 82
; input = 820 (0x0334)
Default = (99
) - (dead band)
o
Celsius ( C)
o o
C
C
o
C
o
Fahrenheit ( F)
o o
F
F
o
F
o
F
6 (0x06)
Unit in
:
Range from [(5 C) + (dead band)] to 37 C
Range from 65 (0x0041) to 370 (0x0172)
Example 20 C; input = 200 (0x00C8)
Unit in
:
Range from [(41 F) + (dead band)] to 99 F
Range from 440 (0x01B8) to 990 (0x03DE)
Example 68 F; input = 680 (0x02A8)
Default = (41 F) + (dead band)
o
Celsius ( C)
o o
o
o
Fahrenheit ( F)
o o
o
o
7 (0x07)
Upper limit of heat
set point
(Advance user can
limit the upper heat
set point in order to
have energy saving)
Lower limit of cool
set point
(Advance user can
limit the lower cool
set point in order to
have energy saving)