RGBLink VSP 3600 User Manual - Manual (Page 86)

5. Communication Software Guideline
Run Software
VSP 3600 User Manual 86
Note
The choice of output resolution, the function is
the same as MENU Input Config Input
Format
Control
IP Setting
User can set IP through this function, and it often used for the same
computer to operate a few devices at the same time or remote control. If
you use a serial port to change IP, it can become effective directly; If you
use the Internet to change IP, after change, upper machine should be shut
off, then to open again, the IP value can normal connection after filling and
changing of network IP.