RGBLink VSP 3600 User Manual - Manual (Page 98)

6. System Setup and Operations
How to change the output resolution?
VSP 3600 User Manual 98
How to change the output resolution?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to: How to determine equipment run normally?
Button operation is as follows:
1. VSP 3600 provides 12 kinds of common output formats for user;
2. Click【MUNE】key, key lights;
3. Set LED panel scan menu, light spin UP/DOWN knob to select
OUTPUT CONFIG;
4. Press【NEXT】to enter the menu，light spin LEFT/RIGHT knob to select
OUTPUT FORMAT;
5. Press【NEXT】 to enter to the menu，light spin LEFT/RIGHT knob to
select output resolution;
6. Press 【NEXT】 to set, that is, to realize the operation of changing
output resolution.
UVP 360
*OUTPUT CONFIG >>
OUTPUT CONFIG
*COMMON FORMAT >>
COMMON FORMAT
>1920x1080x60 <>