Scotsman HID312 Service Manual - Manual (Page 20)

HID312, HID525, HID540
Service Manual
April 2015
Page 20
Dispensing Bin
The dispensing bin may be removed for cleaning or to
provide service access to other components.
1. Go thru steps 1 thru 10 of the Bin Cleaning
Procedure above.
2. Remove chute cover.
3. Remove ice sweep and ice discharge chute.
4. Remove dispense motor drive pin.
5. Twist and remove the water and ice dispense
chutes.
6. Remove the
chute mounting
panel.
7. Remove splash
panel, disconnect
sensors from
harness and set
panel aside.
8. Locate two
plastic knob bolts
under the bin.
Remove them.
9. Locate bin drain
and disconnect it
from bin fitting.
10. Lift the bin up
and off the
chassis. Clean as
needed.
Ice
Sweep
Ice
Discharge
Chute
Dispense
Drive Pin