Teac DR-680 - Manual (Page 13)

TASCAM DR-680
13
Left side panel
l MIC/LINE INPUTS (XLR/TRS) jacks
These are balanced analog XLR/TRS combo jacks
for microphone and line level inputs (1: GND 2:
HOT 3: COLD, Tip: HOT Ring: COLD Sleeve:
GND).
; MIC/LINE INPUTS (TRS) jacks
These are balanced analog TRS jacks for micro-
phone and line level inputs (Tip: HOT Ring:
COLD Sleeve: GND).
CAUTION
Confirm that phantom power is OFF before connecting •
a line level device to a MIC/LINE INPUTS jack. If you
connect a line level device while phantom power is
being supplied, that device and this unit could be
damaged.
When using a condenser microphone, before
•
connecting to and disconnecting from a MIC/LINE
INPUTS jack, confirm that the phantom power for that
jack is OFF. If you connect or disconnect a mic while
phantom power is being supplied, that mic and this
unit could be damaged.
Do not connect an unbalanced dynamic mic to an XLR
•
connector when phantom power is being supplied.
Doing so could damage that mic and this unit.
2 – Names and Functions of Parts