Teac DR-680 - Manual (Page 50)

50
TASCAM DR-680
If you are having trouble with the operation of this
unit, please try the following before seeking repair.
If these measures do not solve the problem, please
contact the store where you bought the unit or a
TASCAM Service Center.
Power will not turn ON. ª
Confirm that the batteries are not dead. •
Confirm that the batteries are installed with the •
correct +/– orientations.
Confirm that the power plug of the AC adaptor
•
(PS-1225L) is connected securely.
The unit is not responding to operations. ª
Is the key lock function ON? •
SD card is not recognized. ª
Confirm that the SD card is inserted securely. •
Playback is not possible. ª
If it is a WAV/BWF file, confirm that it is of a •
compatible sampling frequency.
If it is an MP3 file, confirm that it is of a compatible
•
bit-rate.
No sound is output from the built-in ª
speaker
Are headphones connected? •
Is the volume level of the headphones minimized? •
No sound is output from the headphones ª
Is the volume level of the headphones minimized? •
No sound is output from the monitoring ª
system
Are headphones connected? •
Confirm that the monitoring system is connected •
correctly.
Is the volume level of the connected monitoring
•
system minimized?
Is the output level of this unit minimized?
•
Recording is not possible. ª
Reconfirm connections. •
Reconfirm the input settings. •
Check whether the recording level is too low. •
Confirm that the SD card is not full. •
Confirm that the maximum number of files or takes •
has not been reached.
The recording level is low. ª
Is the trim setting too low? •
Is the • MIC GAIN set to LOW ?
Is the output level of a connected external device •
too low?
The sound I am trying to record is distorted. ª
Is the trim setting too high? •
Is the • MIC GAIN set to HIGH ?
I cannot erase a file. ª
Confirm that the SD card is not write-protected. •
Files on this device do not appear on a ª
computer.
Confirm that the USB port of the unit is connected •
with the computer.
Is the unit recording or in recording standby?
•
10 – Troubleshooting