Teac DR-680 - Manual (Page 39)

TASCAM DR-680
39
If you turn the DATA wheel during playback, playback •
restarts at the position located when you stop turning
the DATA wheel.
Mixing and outputting a multitrack
recording
When playing back the sound of a multitrack
recording, you can use the unit’s internal mixer to
make a stereo mix and then output that.
Adjust the playback sound of tracks 1–6 using mixer
channels 1–6. You can also adjust the overall level of
the mix.
You can output the stereo mix that you have mixed
using the internal mixer to the headphone and digital
output jacks.
Moreover, by setting
A.OUT SEL
to
MIX
in the
I/O
menu, the stereo mix can be output from the LINE
OUTPUTS jacks. When set this way, the sound of the
left (L) channel is output through LINE OUTPUTS 1 , 3
and 5 and the sound of the right (R) channel is output
through LINE OUTPUTS 2 , 4 and 6 .
Using the internal mixer
1 Press the MIX LEVEL key to open the
LEVEL
screen.
2 Adjust the levels of channels 1–6 and the overall
mix on this screen. Use the 1 – 6 and MIX ( LOCK)
keys to select the channels that you want to
adjust.
3 Use the VALUE knob to adjust the optimal level
in a range between 0 and 100 (default value is
100).
4 Press the MIX PAN key to open the
PAN
screen.
5 Use the pan controls on this screen to adjust the
stereo position of each channel. Use the 1 – 6 keys
to select the channels that you want to adjust.
6 Use the VALUE knob to adjust each to a suitable
stereo position using values ranging from
L10–L1 (left) to C (center) and R1–R10 (right).
(Odd number channels are set to L10 and even
number channels are set to R10 by default.)
7 When you have finished making the settings,
press the HOME key to return to the Home
Screen.
NOTE
This function cannot be used when playing a stereo
track.
Using the solo function
Press and hold one of the 1 – 6 keys on the front
panel to enable solo monitoring for that channel.
When solo monitoring, the indicator
appears on the Home Screen, and the indicator
appears for the soloed channel.
To stop solo monitoring, press and hold the key
( 1 – 6 or MIX ) for the soloed channel again.
NOTE
Solo monitoring can only be used with headphones and
the built-in speaker.
Playing a stereo track
In addition to multitrack recording, this unit can also
record a stereo track simultaneously. For example, a
6-track multitrack and a stereo track can be recorded at
the same time.
During playback, press the
MULTI/STEREO key to
switch between the multitrack and the stereo track
6 – Playback