Teac DR-60D - Manual (Page 79)

TASCAM DR-60D
79
8 – Mixer
This recorder has a mixer function that allows you to set the stereo
balance and volume level for each channel.
Making mixer settings
1. From the Home Screen, press the MIXER button to open the
MIXER
screen.
Mono/dual mono mode
Stereo/dual stereo mode
4-channel mode
2. Turn the DATA dial to select the item you want to change.
3. Press the DATA dial to open the setting name and value in a
pop-up window at the top right.
4. Turn the DATA dial to change the setting value.
Item Setting range Operation details
PAN L12–C–R12
Adjusts left-right balance
(L12 (left)–C (center)–R12 (right))
LVL 0–100
Volume level
(0 (min.)–100 (max.))
MS
MODE
OFF Record in ordinary stereo mode.
REC
Use to decode while recording.
Playback is conducted without
decoding.
MON
Record mid-side mic output without
decoding for decoding later. Use this
mode to monitor when recording
with a mid-side mic.
Use this also when playing back
mid-side files that were recorded
without decoding.