Teac DR-60D - Manual (Page 97)

TASCAM DR-60D
97
14 – Specifications
PHONES jack
Connector: φ3.5mm (1/8”) stereo mini jack
Maximum output: 50 mW + 50 mW
LINE OUT jack
Connector: φ3.5mm (1/8”) stereo mini jack
Output impedance: 200 Ω
Standard output level: −10 dBV
Maximum output level: +10 dBV
Note)
Maximum output level: level at which a digital full-scale (0 dBFS)
signal can be input without distorting when you adjust the input
knob
Standard output level: level at which a standard level (–20 dBFS)
signal can be input when you adjust the input knob
Control input and output
USB jack
Connector: USB Mini-B Type
Format: USB 2.0 HIGH SPEED mass storage class
REMOTE jack
Connector: φ2.5mm TRS Jack
Audio performance
Frequency response
20-20kHz +0.5/−2dB
(LINE IN or MIC IN to LINE OUT, Fs44.1k/48kHz, JEITA)
20-40kHz +0.5/−3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA)
Distortion
0.02% or less
(LINE IN or MIC IN to LINE OUT, Fs44.1k/48k/96kHz, JEITA)
S/N ratio
92dB or more
(LINE IN or MIC IN to LINE OUT, Fs44.1k/48k/96kHz, JEITA)
Equivalent input noise
–120dBu or more
Note) JEITA: Conforming to JEITA CP-2150
Computer compatibility
For the latest information on compatible operating systems, check
the TASCAM website (http://tascam.com/).
Windows
Pentium 300 MHz or faster
128 MB or more memory
USB port (USB 2.0 recommended)
Macintosh
Power PC, iMac, G3, G4 266MHz or faster
64 MB or more memory
USB port (USB 2.0 recommended)