Teac DR-60D - Manual (Page 91)

TASCAM DR-60D
91
12 – Messages
The following is a list of the popup messages that might appear on the DR-60D under certain conditions. Refer to this list if one of these
popup messages appears and you want to check the meaning or determine a proper response.
Message Meaning and response
File Name ERR
The DIVIDE function would cause the file name to exceed 200 characters. The DIVIDE function adds “a” or “b” to the
end of the original file name. Before choosing the DIVIDE function, connect the unit to a computer and edit the file
name to less than 198 characters.
Dup File Name
The DIVIDE function would cause the file name to be the same as that of an existing file. The DIVIDE function adds “a“
or “b” to the end of the original file name. Before choosing the DIVIDE function, connect the unit to a computer and
edit the file name.
File Not Found The file either cannot be found or could be damaged. Check the file using a computer.
Non-Supported
The audio file is not a supported format. Please see "9 – Connecting with a computer" for file formats that this unit
can use.
Battery Empty The battery is almost out of power. Replace the AA batteries.
MBR Error Init CARD
The card is not formatted properly or the formatting is broken. Change the card or press the DATA dial when this
message appears to format the card in FAT format.
CAUTION: Execution of FAT formatting erases all data currently on the card.
Format Error
Format CARD
The FAT formatting of the card is abnormal or broken. This message also appears if you FAT formatted the card
using a computer connected by USB and if a new card is inserted in the unit. Always use the DR-60D to conduct FAT
formatting of cards to be used with it. Change the card or press the DATA dial when this message appears to format
the card in FAT format.
CAUTION: Execution of FAT formatting erases all data currently on the card.
File Not Found
Make Sys File The system file is missing. This unit requires a system file for operation. When this message appears, press the DATA
dial to automatically create a system file.
Invalid SysFile
Make Sys File The system file required to operate this unit is invalid. When this message appears, press the DATA dial to automati-
cally create a system file.
Invalid Card
Change Card
Something might be wrong with the SD card. Change the SD card.