Teac DR-44WL Reference Manual - Manual (Page 32)

32
TASCAM DR-44WL
6- Managing Songs (MTR Mode only)
In the MTR mode of this recorder, one track (recording data
group) is treated as one song and data is managed on a song
basis. For one song, four tracks and a master file after mixing
down are saved.
To record or create music, a song being created needs to be
loaded or a new song needs to be created.
This chapter describes basic operations such as a method for
loading songs and a procedure for creating new songs as well as
various functions to mange songs.
Song Operation
Select (highlight) the desired song file on the
SONG
screen,
and press the QUICK button to open the QUICK pop-up menu
below.
Use the wheel to select (highlight) the desired item, and press
the ENTER/MARK button. Then, the unit operates as follows:
LOAD
Loads the selected song.
CREATE
Creates a new song.
INFORMATION
Information about the selected song (date/time, size) will pop
up.
RENAME ( V1.10 supported)
Edits the name of the selected song.
DELETE
Deletes the selected song.
Loading Songs
Use the following procedure to load the song you want.
1. Set the mode to
MTR
mode. (see “Selecting Operation
Mode” on page 16)
2. Press the MENU button when the recorder is stopped to
open the MENU screen.
3. Using the wheel, select (highlight)
SONG
and press the
ENTER/MARK or / button.
The
SONG
screen will be displayed.
NOTE
The
*
icon appears for a song currently being loaded.
4. Use the wheel to select (highlight) the desired song and
press QUICK to open the QUICK pop–up menu below.
NOTE
After selecting (highlighting) the desired song, press the
ENTER/MARK button to load the selected song and return
to the Home screen.
5. Using the wheel, select (highlight) LOAD and press the
ENTER/MARK button.
The selected song will be loaded, and the pop–up will
disappear.
The icon
* will move to the selected song.
6. Press the 8/HOME button to return to the Home screen.