Teac DV-W14R - Manual (Page 13)

Rear Panel
Rackmount DVD/CD Duplicator User’s Manual 5
Rear Panel
Figure 4 illustrates the rear panel of the Rackmount DVD/CD Duplicator.
The unit features an AC Power In connector, an AC voltage selector and cooling
fans.
Figure 4. Rear Panel of the Rackmount DVD/CD Duplicator
AC voltage selector: Use this switch to select either 115VAC or 220VAC.
AC Power In connector: Connect the included AC power cable to this input
connector. Plug the other end of the power cable into a three-prong receptacle
AC power outlet.
cooling fan: Ball-bearing fans cool the Rackmount DVD/CD Duplicator.
Caution: Before you turn on the power to the Rackmount DVD/CD
Duplicator, make sure the correct voltage is selected. Otherwise, you risk
damage to the unit. The default setting is 115VAC.
Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk
electrical shock or damage to the unit.
Note: To ensure proper operation, use only the original AC power cable with
your DVD/CD Duplicator.
AC Power In connector
cooling fans AC voltage selector