Teac DV-W14R - Manual (Page 26)

9 Image
18 Rackmount DVD/CD Duplicator User’s Manual
The LCD displays the following message:
9 Image
The Image menu consists of seven functions (9.1 through 9.7). The Image menu
includes Load, Delete Image, Image Info, Compare Image, Select Image, Image
Src Drive , and Image Format Info functions. The data loaded onto the hard disk
drive is called an “image file.”
9.1 Load
The factory-installed hard disk drive was partitioned and formatted at the factory.
An alphabetical letter identifies each partition. Each partition is approximately
5GB in capacity. The number of partitions depends on the capacity of the hard
disk drive. The Load function enables you to transfer data from the source DVD
Writer drive to the current partition of the hard disk drive. (Note: P:A stands for
partition A.) You can load as many disc images as the number of partitions
available on the hard disk drive.
9.2 Delete Image
Use the
Delete Image function to delete an image stored in a particular partition.
9.3 Image Info
Use the
Image Info function to display basic information for an image file stored
in a particular partition.
9.4 Compare Image
Use the
Compare Image function to compare the contents of a disc in the source
DVD Writer with the image file in the partition.
9.5 Select Image
The internal hard disk drive was partitioned and formatted at the factory. An
alphabetical letter identifies each partition. Each partition is approximately 5GB
in capacity. The number of partitions depends on the capacity of the hard disk
drive. Use the Select Image function to select an image file that is stored in a
specific partition on the hard disk drive.
Note: P: A means Partition A. To copy from this partition, you must first
load an image (data). Please refer to the section “Basic Operation” on
page 9 in Chapter 2 for more information.
1. COPY P: A