Teac DV-W14R - Manual (Page 27)

9.6 Image Src Drive
Rackmount DVD/CD Duplicator User’s Manual 19
9.6 Image Src Drive
Use the Image Src Drive function to select the DVD Writer drive as the source
from which you can load data into a particular partition as an image file.
9.7 Image Format Info
The partitions on the hard disk drive can be configured to store a CD (1GB), DVD
(5GB), or a Double Layer (DL) (10GB) image. The factory partitions the hard disk
drive for DVD images at (5GB per partition). Use the Image Format Info function
to verify this setting.
10. Edit Track (for CD only)
The Edit Track functions enable you to create and copy a collection of songs from
different audio discs.
10.1 CD to CD Edit
You can use this function to copy tracks from one or more discs and burn them to
a CD-R. This function works only in the 1x4 mode of operation.
The CD to CD Edit function enables you to select specific tracks from various
audio discs, combine them to create a collection of songs, and copy the collection
to blank CD-R/CD-RW discs.
1. Insert a source disc into the source optical drive and a blank CD-R disc into
the target drive.
2. Switch to function [10.1 CD to CD] by pressing the button.
3. Press the (ENT) button.
The LCD panel displays the following:
Note: The CD+G value must be set to OFF before you can use the Track
Extraction feature. For more information, refer to “12 Advanced Setup (Adv
Setup)” on page 27.
Note: CD-R discs support up to 80 minutes of audio. Therefore, the number of
tracks that can be copied onto a single disc depends on the length of each
individual track.
10-01. Edit Track
CD to CD Edit