Thinklogical Touch Panel Manual - Manual (Page 10)

Revision B JULY 2010 4
Set-Up
1. Carefully remove the Touch Panel from its shipping package. Inspect the Touch
Panel to make certain that no damage occurred during shipment. When the Touch
Panel has been inspected and found to be in good condition, the installation process
can begin.
2. Connect the Touch Panel to a suitable power source using the power supply provided.
3. Connect the Touch Panel to the network using the CAT5 cable provided.
4. Turn the Power Switch ON.
5. Repeat Steps 1 through 4 for each additional Touch Panel.
Order of Installation Events
Please refer to the Quickstart Guide included in the contents of the shipment for detailed
instructions. A copy of the Quickstart is also available in Appendix A.