Thinklogical Touch Panel Manual - Manual (Page 11)

Revision B JULY 2010 5
Part 2: Software
IP Address:
192.168.13.XXX
192.168.13.XXX 192.168.13.XXX
192.168.13.XX
192.168.13.X
Administration
Station
Linux Rack-Mount Web Server
VX 160
router
Figure 3: Touch Panel and VX160 Set-Up Diagram
How to configure the server
1. Set up the IP address for the server
a. System -> Network -> ...
2. Decide on station names and ports
3. Edit stations.csv
a. Column headings always end with a colon (:)
b. The system ships with default names assigned to every physical port
c. One row will rep
eat “Source Category:” across multiple columns, with the category
names displayed below
i. (not all headings need a field below them, but every field requires a header
somewhere in the column above it.
ii. The order of the names decides the order the categories will be displayed in the GUI