Thinklogical Touch Panel Manual User Manual
Page 17
Advertising
Revision B
JULY 2010
11
5. Press Connect again, and now it is connected as well, indicated by the highlighted
X
.
Figure 8: How to Make a Connection, Step 5.
How to Break a Connection
From the Detail screen, you can break a connection. Pressing the
X
between a connected source
and its destination will break that connection.
1. Click on the
X
between the Source and Destination you wish to disconnect. CPU 01
and DESK 04 are no longer connected as shown in the screen in Figure 8.
Advertising