Thinklogical VX640 Router Manual - Manual (Page 16)

VX640 Router Manual, Rev. F 11 November, 2013
Controller Card
The hot-swappable Controller Card connects the Router to an External CPU. The serial port can also be
used for 3rd party controller integration (such as Crestron, AMX or home-spun interfaces). Also, the X4
Configurator Software can be used to control the VX Router via the LAN port.
Ethernet Control
If the VX640 KVM Matrix Switch is to be controlled via Ethernet, it will require a static IP address. This
value can be set via the DIP switch located on the Interconnect module. See Appendix B, Setting the
DIP Switch Instruction Guide (page 30) for detailed instructions on how to access and set the DIP
Switch. Factory default setting will be 192.168.13.15.
VX640 DIP Switch Settings