Thinklogical VX640 Router Manual - Manual (Page 5)

VX640 Router Manual, Rev. F iv November, 2013
PREFACE
About this Product Manual
This product manual is divided into four sections, for Hardware, Software, Safety Requirements and
Product Support. These are sub-divided to help you easily find the topics and procedures you are
looking for. This manual also contains Appendices.
Part 1 – Hardware: This section contains all the information and instructions on how to assemble your
equipment.
Part 2 – Set-Up and Installation: This section contains all the requirements and procedures necessary
to connect and install your equipment, including FPGA upgrades.
Part 3 – Safety & Regulatory Requirements: Thinklogical
®
strongly recommends that you read this
section prior to starting the hardware assembly.
Part 4 – Thinklogical
®
Support: Thinklogical
®
provides the best customer support available. If you have
any questions or need to contact the company, please refer to this section of the manual.
Conventions Used in this Manual
Throughout this manual you will notice certain conventions that bring your attention to important
information. These are Notes and Warnings. Examples are shown below.
Note: Important Notes appear in blue text preceded by a yellow exclamation point symbol,
as shown here.
A note is meant to call the reader’s attention to helpful information at a point in the text that is relevant to
the subject being discussed.
Warning! All Warnings appear in red text, followed by blue text, and preceded by a red
stop sign, as shown here.
A warning is meant to call the reader’s attention to critical information at a point in the text that is relevant
to the subject being discussed.