Tri Tool 204B Beveler User Manual
Page 12
12
TRI TOOL INC.
92-0699 : Rev. 060412
MATERIAL CUTTING CAPABILITIES
Mild steels, chrome steels, (Rc 35 max), stainless steel, copper-nickel alloys and
aluminum without limitations except size and wall thickness as specified in the
above paragraphs.
Inconel and some other high temperature alloys may require special procedures as
a function of wall thickness and type of end preparations. Contact Tri Tool’s
Engineering Department for details.
CLEARANCE AND DIMENSIONS
Rotating Head DIA.
4.00” (101.6 mm)
Length
8.97” (227.8 mm)
Length Over Motor
20.25” (514.35 mm)
Available Feed Travel
1.50” (38.1 mm)
DRIVE SYSTEM
Final Drive
Gear Driven
Electric Motor - 2 speed Ranges & 6:1 Gear Reduction
Free speed
Low Range
168 rpm
High Range
316 rpm
Max. HP Speed
Low Range
112 rpm
High range
210 rpm
POWER SUPPLY
115 VAC, 5.25 Amps, 28 to 60 Hz.