Tri Tool 204B Beveler - Manual (Page 18)

18
TRI TOOL INC.
92-0699 : Rev. 060412
NOTE:
In order to avoid cutting the ramps and/or jaw blocks during the machining
operation, the mandrel must be installed beyond the final preparation
location.
Tighten the draw nut to force the jaw blocks out to the inside diameter of the pipe or
tube.
Draw Nut
Pipe
Jaw Block
and/or
Ramp
Final Prep
Location
Mandrel Assembly
Feed Handle
Draw Nut
Tool Bit 1/8" (3 mm)
Clearance
Pipe
Mandrel
Clearance