Tri Tool 204B Beveler User Manual
Page 9
9
Model 204B BEVELMASTER™
92-0699 : Rev. 060412
DRIVE SYSTEM
Final Drive
Gear Driven
Pneumatic Motor
Free speed
325 rpm
Max. H.P. speed
162 rpm
POWER SUPPLY
Pneumatic motor requires 55 cfm ( 26 L/s ) air supply at 90 psi ( 621 kPa ) for
maximum horsepower delivery.
Note: Air Supply must have a filter/regulator/lubricator ( FRL ) system to protect the
warranty on the air motor.
CUTTING HEAD SPEEDS
Maximum Cutting Head Speed
162 rpm
Cutting Head Speed @ Maximum H.P.
82 rpm
Functional Speed Range
20-100 rpm
RPM at 300 Surface Inches Per Minute
4.50” ( 114.3mm )
21 rpm
1.25” ( 31.8mm )
76 rpm
SPEED CONTROL
On/off safety lever valve and twist-type air flow control valve.
MOUNTING
Manually actuated draw rod expands mandrel ramps and jaw blocks.
FEED
Manual-Feed Handle is in line at the back of the machine. Feed rate is
.100” (2.5mm ) per revolution of the feed handle.