Tri Tool 204B Beveler - Manual (Page 8)

8
TRI TOOL INC.
92-0699 : Rev. 060412
PIPE CUTTING CAPACITIES
Basic Pipe Sizes
All schedules of 1 1/4” through 4” pipe.
Some schedules may require optional equipment.
Basic Tube Size
Up to .531” ( 13.5mm ) wall tubing with a maximum O.D. of 4.50” ( 114.3mm )
and a minimum I.D. of 1.25” ( 31.7mm ) may be beveled with standard
mandrel.
Wall Thickness Capacity
Wall thickness of all standard pipe schedules [.531” (13.5mm) maximum] in
the range listed. Contact Tri Tool for heavier wall procedures.
Counterboring Operations
The tool will counterbore pipe and tubing with an I.D. range of 1.50” (38.1mm)
to 4.33” ( 110.2mm ).
Material Cutting Capabilities
Mild steels, Chrome steels ( Rc 35 max ), stainless steel, copper-nickel alloys
and aluminum without limitations except size and wall thickness as specified
in paragraph #2.
Inconel and some other high temperature alloys may require special proce-
dures as a function of wall thickness and type of end preparation. Contact
Tri Tool’s Engineering Department for details.
CLEARANCE AND DIMENSIONS
Rotating Head DIA. 4.00” ( 101.6mm )
Length Over Motor 19.88” ( 505.0mm )
Length (of machine ) 8.97” ( 227.8mm )
Available Feed Travel 1.50” ( 38.1mm )