Vuzix Wrap 1200VR User Guide - Manual (Page 15)

Getting to Know Your Eyewear
Display Settings
For the Wrap video eyewear to properly display video from a Windows based PC the computer
must be configured in a specific manner:
• The computer must be configured for dual monitors using the “Duplicate”, mirror, or
clone mode displayed option where both the monitors show the exact same image. The
name used for this display mode varies from one O/S or O/S version to another.
• The screen refresh rate must be set to 60 Hz., regardless of the screen resolution.
• The sharpest image is attained when the lowest resolution is used. For most applications
a higher resolution is preferred and may be required for some applications. The highest
supported resolution of 1280x720 is usually the best suited to most applications. The
supported display resolutions are: 640x480, 800x600, 1024x768, and 1280x720.
Computer Operating System
The Wrap 1200VR is designed for use with a Windows based PC, including Windows XP, Vista,
and Windows 7. It is compatible with both 32-bit and 64-bit versions of these operating systems.
Note A Wrap 1200VR may work with other operating systems such as a Mac or Linux system but
some functionality may be limited. These alternate operating systems are not officially
supported and Vuzix does not provide supporting software or technical support for non-
Windows based operating environments.
Wrap Noise-Isolating Earphones
The Wrap eyewear earphones are interchangeable and removable to allow for the use of alternate
speaker systems. When external speakers of headphones are being used, adjust the volume using
volume controls on the alternate speakers or your computer.
Noise-isolators are changed by simply sliding them off or onto the audio stem of your earphones.