Vuzix Wrap 1200VR User Guide - Manual (Page 16)

Tip: Windows automatically sets a new speaker system as the default audio device when first
installed. If you prefer to use another audio device, open the Windows “Sound” Control Panel
and choose the preferred speaker system.
Adjustment Buttons
Volume for the earphones is controlled using the Adjustment Buttons on the Control Box, when
the OSD is not displayed.
Nose Bridge
Your Wrap 1200’s nose bridge pads are adjustable up and down and for separation. The
adjustment of the nose bridge affects both comfort and the position of the displays and hence the
quality of your viewing experience.
To adjust the nose bridge:
 Slide the nose bridge assembly in and out to adjust its reach to position the eyewear
displays directly in your line of sight.
Note: If you withdraw the nose bridge assembly too far enough, it will come completely out of the
display module. Don't worry if this happens as it can be easily slid back in and enables you to
replace the nose bridge assembly should it be broken.
 Gently bend the wire arms of the nose pad to achieve a comfortable fit with the pad’s
face resting on the bridge of your nose – in the same manner that you would adjust the
nose pads on standard eyeglasses.
Tip: Gentle persuasion with a pair of needle nose pliers works best to bend the wire nose pad
arms. This places the least amount of strain on the assembly and adjacent parts.