Wavetronix SmartSensor Matrix (SS-225) - User Guide - Manual (Page 59)

58 CHAPTER 5 • COMMUNICATION
Note
To configure channels for a future installation, connect using a virtual connection,
create a virtual sensor file and then back up the configuration settings that you cre-
ated. After the file is successfully backed up, the virtual sensor file will change to a
sensor setup file and can be restored to any sensor in the field.
When a connection is made to the SmartSensor Matrix, the main menu will appear and all
configuration options will become available (see Figure 5.9).
Figure 5.9 – Main Menu (Connected)
Communication Error Log
The error log contains all errors stored in the sensor’s memory buffer. If you are having
trouble connecting, using the error log may be helpful in the troubleshooting process. If you
continue having trouble, save the error log file and contact Wavetronix Technical Services.
Note
The error log is cleared every time you close SSMM, so if you need to save the file, do
so before shutting the program down.
Click the Error Log icon to view the communications error log (see Figure 5.10). The
error log can also be accessed by clicking on the Error Log icon at the bottom of the Com-
munication screen.