Wavetronix SmartSensor Matrix (SS-225) - User Guide - Manual (Page 90)

In this chapter
˽ Channel Indicators
˽ Verification Menu Bar
9
After the configuration is complete, you will need to verify that the sensor was configured
correctly. To verify lane configuration and channel mapping, click on tab 3. This will bring
up the Verification window (see Figure 9.1).
Figure 9.1 – Verification View
In the Verification window, vehicle detections will appear as light blue rectangles. The ex-
tent of these detections will vary based upon the length of the detected vehicle and the
length of queued traffic.
Verification
9