Westermo ED-10 TCP - Manual (Page 25)

25 6609-2211
7.3 Configurable parameters
Configurable parameters are summarised in the following tables. A more detailed
description follows. Parameter names and valus are case sensitive.
Serial interface
Parameter
Data rate in bits
per second, bit/s
Number of data
bits
None, even or
odd parity
Number of stop
bits
Flow control
ON or OFF.
Parameter
name accepted
DATARATE
dataRate, datarate
baude, BAUDE,
bps
DATABITS
dataBits, databits
PARITY
parity
STOPBITS
stopBits, stopbits
FLOWCONTROL
flowControl
flowcontrol
Allowed values
300–115 200
7 or 8
0, 1 or 2
no, none, odd, even
1 or 2
0 or 1, NO, no,
NONE, none
HW, hw
Apperance
in .ini files Apperance in .set
files
DATARATE
DATABITS
PARITY
STOPBITS
FLOWCONTROL
Remarks
0=none, 1=odd
2=even
Two stop bits only
when no parity is
selected.
0=NO, 1=HW
Parameter
End of Frame
Character ASCII
value
End of Frame
Delay in ms
Maximum num-
ber of bytes in
Frame
Send End of
Frame Character
Parameter
name accepted
EOFCHARACTER
eofChar, eofchar
eofcharacter
EOFDELAY
eofDelay, eofdelay
MAXBYTEFRAME
maxByteFrame
maxbyteframe
EOFCHARSEND
eofCharSend
eofcharsend
Allowed values
0–256
0–2 550
1–1 500
0 or 1
Apperance
in .ini files Apperance in .set
files
EOFCHARACTER
EOFDELAY
MAXBYTEFRAME
EOFCHARSEND
Remarks
256 = No EoF
Character. (EoF charac-
ter not used).
0 = No EoF Delay
(EoF Delay not used).
This parameter might
be override by TCP
0 will remove the EoF
Character before data
is sent over network.
Packing algorithm